,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.
Technical faults
Problem
After the dishwasher was
turned on with the K
button, the display stays
off and the "Start/Stop"
indicator does not flash.
The dishwasher stops
during a program.
One of the following
faults appears on the
display:
; Fault FXX
L Waterproof
Frequently Asked Questions
Possible fault
The machine is not
plugged in.
The circuit breaker has
tripped.
The circuit breaker has
tripped.
There may be a
technical fault.
The waterproof system
has activated.
Solution
Insert the plug.
Reset the circuit breaker.
See the data plate for
minimum amperage.
– Reset the circuit breaker
(see the data plate for
minimum amperage).
– If the circuit breaker
trips again. Contact
Miele.
Before fixing the fault:
– Press the K button to
turn the dishwasher off.
After a few seconds:
– Turn the dishwasher on.
– Select the desired
program.
– Press the Start/Stop
button.
If the fault is indicated
again, a technical fault has
occurred.
– Contact Miele.
– Turn off the water
supply.
– Contact Miele.
47