General Problems With The Dishwasher - Miele G 5570 Operating Instructions Manual

General problems with the dishwasher

Problem
The indicators and the
display is dark. Only
the "Start/Stop" K
indicator flashes
slowly.
Detergent residue is left
in the dispenser at the
end of a program.
The detergent
dispenser lid cannot be
closed properly.
The door and the
interior walls are still
wet after a program has
finished.
Water remains in the
wash cabinet at the end
of a program.
Frequently Asked Questions
Possible fault
The display goes into
"Standby" mode to save
energy
The dispenser was
damp when detergent
was added.
Detergent residue is
blocking the catch.
This is not a fault.
It is the normal
operating mode of the
drying system.
The triple filter in the
wash cabinet is
clogged.
The drain pump or the
non-return valve may
be blocked.
The drain hose is
kinked.
Solution
Press the K button.
Standby is ended.
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
– Press the K button to turn
the dishwasher off.
Clean the triple filter (see
"Cleaning and care").
Clean the drain pump and
the non-return valve (see
"Cleaning and care").
Remove any kinks from the
drain hose.
49