Pace Setter G02743 Operating Instructions Manual page 8

SAFETY INFORMATION
Specific Safety Rules
• Hold tool by its insulated grip surface when performing an
operation where the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make exposed metal
parts of the cutting tool "live" and shock the operator.
• Accessories must be rated for at least the speed recommended
on the tool warning label. Wheels and other accessories running
over rated speed can fly apart and cause injury.
• Know your power tool. Read operator's manual carefully. Learn
its applications and limitations, as well as the specific potential
hazards related to this tool. Following this rule will reduce the risk
of electric shock, fire, or serious injury.
• ALWAYS wear safety glasses and a dust mask. Use only in well-
ventilated areas. Using personal safety devices and working in a
safe environment reduces risk of injury.
• ALWAYS disconnect the power cord from the power source
before making any adjustments or attaching any accessories.
You may unexpectedly cause the tool to start, leading to serious
personal injury.
• Inspect tool cords periodically and, if damaged, have repaired at
your nearest authorized service center. Constantly stay aware
of cord location. Following this rule will reduce the risk of electric
shock or fire.
• Be aware of the switch location when placing the tool down or
when picking the tool up. You may accidentally activate the switch.
• Check damaged parts. Before further use of the tool, a guard
or other part that is damaged should be carefully checked to
determine that it will operate properly and perform its intended
function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged
should be properly repaired or replaced by an authorized service
center. Following this rule will reduce the risk of shock, fire, or
serious injury.
8