Electrical Safety - Pace Setter G02743 Operating Instructions Manual

SAFETY INFORMATION
• Keep bystanders, children and visitors away while operating a
power tool. Distractions can cause you to lose control.

Electrical Safety

• Double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. DO NOT change the plug
in any way. Before plugging in the tool, be certain the outlet
voltage supplied is within the voltage marked on the nameplate.
DO NOT use "AC only" rated tools with a DC power supply.
• Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased
risk of electric shock if your body is grounded.
• DO NOT expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
• DO NOT abuse the cord. NEVER use the cord to carry the tool or
pull the plug from an outlet. Keep cord away from heat, oil, sharp
edges or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.
• When operating a power tool outside, use an outdoor extension
cord marked "W-A" or "W". These cords are rated for outdoor use
and reduce the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a
residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
5