Pace Setter G02743 Operating Instructions Manual page 7

SAFETY INFORMATION
• Disconnect the plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such
preventive safety measures reduce the risk of the tool starting
accidentally.
• Store idle tools out of reach of children and other untrained
persons. Tools are dangerous in the hands of untrained users.
• Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools with sharp cutting edges are less likely
to bind and are easier to control. Any alteration or modification is
a misuse and may result in a dangerous condition.
• Check for misalignment or binding of moving parts, breakage
of parts and any other conditions that may affect the tool's
operation. If damaged, have the tool serviced before using. Many
accidents are caused by poorly maintained tools. Develop a
periodic maintenance schedule for your tool.
• Use only accessories that are recommended by the manufacturer
for your model. Accessories that may be suitable for one tool may
become hazardous when used on another tool.
• Keep the tool and its handle dry, clean and free from oil and
grease. ALWAYS use a clean cloth when cleaning. NEVER use
brake fluids, gasoline, petroleum-based products, or any strong
solvents to clean your tool. Following this rule will reduce the risk
of loss of control and deterioration of the enclosure plastic.
Service
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqualified
personnel could result in injury.
• When servicing a tool, use only identical replacement parts.
Follow instructions in the maintenance section of this manual.
Use of unauthorized parts or failure to follow maintenance
instructions may create a risk of electric shock or injury.
7