Advertisement
Do you have a question about the PG30 and is the answer not in the manual?
How do I program it
To program the Alarm Lock PG30:1. Programming the Management Code: - Enter the Master Code. - Press [AL] [2] [AL] [new Management Code] [AL].2. Programming the Passage Code: - Enter the Master Code or Management Code. - Press [AL] [3] [AL] [new Passage Code] [AL].3. Setting the Security Level: - Use the Master Code or Management Code to program security levels. - There are three security levels available.4. Adjusting the Volume: - Enter the Master Code or Management Code. - Press [AL] [1] [5] [AL] to set High volume.To arm or disarm the unit, enter the Master Code.
This answer is automatically generated
How too program it
Need help?
Do you have a question about the PG30 and is the answer not in the manual?
Questions and answers
How do I program it
To program the Alarm Lock PG30:
1. Programming the Management Code:
- Enter the Master Code.
- Press [AL] [2] [AL] [new Management Code] [AL].
2. Programming the Passage Code:
- Enter the Master Code or Management Code.
- Press [AL] [3] [AL] [new Passage Code] [AL].
3. Setting the Security Level:
- Use the Master Code or Management Code to program security levels.
- There are three security levels available.
4. Adjusting the Volume:
- Enter the Master Code or Management Code.
- Press [AL] [1] [5] [AL] to set High volume.
To arm or disarm the unit, enter the Master Code.
This answer is automatically generated
How too program it