Programming - Miele KM 5773 Operating And Installation Instructions

You can change the standard settings
of your hob (see chart).
Proceed as follows:
^ With the hob switched off, touch the
hob ON/OFF sensor s and the safety
lock sensor $ at the same time until
the indicator lamp for the safety lock
flashes.
A P (Programme) and an S (Status) will
appear in the cooking zone display with
a number which shows the current
setting (see chart).
^ First select the programme you want,
by touching the + or - sensor for the
front left cooking zone, then select
the required status by touching the +
or - sensor for the front right cooking
zone (see chart). You can alter
several programmes one after the
other in this manner.
To store the new settings in memory,
touch the hob ON/OFF sensor s until
the displays go out.
If you do not wish to store the settings
in memory, touch the safety lock sensor
$ until the displays go out.

Programming

37