Switching A Cooking Zone Off Automatically; Timer Starting Value - Miele KM 5773 Operating And Installation Instructions

Switching a cooking zone off
automatically
You can set a time at the end of which a
given cooking zone will switch off
automatically. This automatic switch-off
function can be used on all of the
cooking zones at the same time.
^ Select a power level for the zone you
require, e.g. back right, in the usual
way.
^ Touch the m sensor until the indicator
lamp for the selected zone flashes
(back right).
If more than one cooking zone is
switched on, the indicator lamps will
light up clockwise beginning with the
front left zone.
^ Touch the - or + sensor until the time
you require appears in the display,
e.g. 15 minutes.
The time then counts down in minutes.
The time remaining can be seen in the
Timer/Memory display and changed at
any time by touching - or +.
If you want to set another cooking zone
to switch off automatically, follow the
same steps as described above.
Timer and Memory function
If more than one switch-off time is
programmed, the shortest time
remaining will show in the display, and
the indicator lamp for that particular
cooking zone will flash. All the other
indicator lamps will light up constantly.
If you want to check on the remaining
time for another zone, touch the m
sensor until the indicator lamp for the
zone you require flashes.

Timer starting value

The timer is set at the factory so that it
starts with 01 or 99 when the + or -
sensor is touched.
This setting can be adjusted so that the
time you last used appears in the
display when you press + or - (see
"Programming - P14.").
Example:
If P14, S1 is programmed, and the last
time the minute minder was used was
for 5 minutes, 00 will appear in the
display when you switch on the Timer;
when you then touch + or -, the display
will change to 05.
You can still select any time you want,
even if you have adjusted the timer
default setting.
27