Installing The Display Assembly; Removing The System Board - Dell Latitude 3350 Owner's Manual

Installing the display assembly

1. Align the palmrest assembly with the display assembly.
2. Tighten the screws to secure the display hinges to the palmrest assembly.
3. Connect the following cables:
a. touch panel
b. network connector
c. display
4. Align the bracket over the display cable and tighten the screw to secure the bracket to the computer.
5. Connect the antenna cables to the WLAN card and route them along the channels on the computer.
6. Install the:
a. base cover
b. battery
7. Follow the procedure in

Removing the system board

1. Follow the procedure in
2. Remove the:
a. SD card
b. battery
c. SIM card
d. base cover
e. memory module
f. keyboard trim
g. keyboard
h. coin cell battery
i. audio connector board
After working inside your
Before working inside your
computer.
computer.
25