Dell Latitude 3350 Owner's Manual page 30

Option
Date/Time
Table 3. System Configuration
Option
Integrated NIC
SATA Operation
Drives
SMART Reporting
USB Configuration
30
Description
Allows you to set the date and time.
Description
Allows you to configure the integrated
network controller. The options are:
• Disabled
• Enabled
• Enabled w/PXE (Default Setting)
• Enabled UEFI Network Stack
NOTE: This option is disabled by
default. If you enable this
option, the UEFI Networking
Protocols that are available are
installed, allowing the pre-OS
and the OS networking features
to use the enabled NICs. You
may have to disable the Enabled
w/PXE to use this option.
Allows you to configure the internal
SATA hard-drive controller. The options
are:
• Disabled
• AHCI (Default Setting)
NOTE: SATA is configured to
support AHCI mode.
Allows you to configure the SATA drives
on board. The option is:
• SATA-0
Default Setting: The drive is enabled.
This field controls if the hard drive errors
for the integrated drives are reported
during system startup. This technology
is part of the SMART (Self Monitoring
Analysis and Reporting Technology)
specification.
• Enable SMART Reporting — This
option is disabled by default.
Allows you to define the USB
configuration. The options are:
• Enable Boot Support
• Enable External USB Port
• Enable USB 3.0 Controller