3. Remove the Rear cover hooks (L, R).
7.18. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.17.)
2. Remove the S-Board shield case.
3. Remove the screws (×2
unit.
4. Disconnect the connector (S1).
5. Remove the Power button.
6. Remove the screw (×1
) and remove the S-Board
) and remove the S-Board.
7.19. Remove the Front glass
1. Remove the Cabinet assy. (See section 7.17.)
2. Remove the S-Board. (See section 7.18.)
3. Remove the screws (×5
4. Remove the screws (×4
5. Remove the Glass holder side (L, R).
6. Remove the screws (×7
7. Remove the Glass holder top front.
8. Remove the Glass holder bottom front.
9. Remove the Front glass.
23
).
).
).