Apm Configuration - Asus Motherboard M2V-MX User Manual

2.5.4

APM Configuration

APM Configuration
Power Management/APM
Restore on AC Power Loss
Advanced Resume Events Controls
Power Ob by External Modem
Power On by PCI device
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Power On By RTC Alarm
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM)
feature. Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power Off ]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power
loss. When set to Last State, the system goes into either off or on
state whatever the system state before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PCI LAN or modem card. This feature requires an ATX power
supply that provides at least 1A on the +5VSB lead. Configuration options:
[Disabled] [Enabled]
ASUS M2V-MX
[Enabled]
[Power Off]
[Dusabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
2-31