Installing The Heatsink And Fan - Asus Motherboard M2V-MX User Manual

1.6.2

Installing the heatsink and fan

The AMD AMD Athlon™ 64 FX/ Athlon™ 64 X2/AMD Athlon™ 64/AMD
Sempron™ processor require a specially designed heatsink and fan assembly
to ensure optimum thermal condition and performance.
Make sure that you use only qualified heatsink and fan assembly.
Follow these steps to install the CPU heatsink and fan.
1. Place the heatsink on top of the installed CPU, making sure that the
heatsink fits properly on the retention module base.
•
•
•
CPU Heatsink
Retention Module Base
Your boxed CPU heatsink and fan assembly should come with installation
instructions for the CPU, heatsink, and the retention mechanism. If the
instructions in this section do not match the CPU documentation, follow
the latter.
1-10
The retention module base is already installed on the motherboard
upon purchase.
You do not have to remove the retention module base when
installing the CPU or installing other motherboard components.
If you purchased a separate CPU heatsink and fan assembly, make
sure that a Thermal Interface Material is properly applied to the CPU
heatsink or CPU before you install the heatsink and fan assembly.
CPU Fan
Retention bracket
Chapter 1: Product introduction
Retention bracket lock