Miele GAS KM 81-2 Operating Instructions Manual page 38

@ä
@ä
Changing the main jet, (does not
apply to conversion to Natural Gas).
Using a 10 mm socket spanner, loosen
the main jet from their holders, using
a 13 mm spanner to counterhold.
Screw in the new main jet, once again
using the spanner to counterhold.
38
Conversion to alternative types of gas
Conversion to alternative types of gas
Changing the small jets
Natural gas
Liquid gas
The jets must be changed:
b
Small jet with smaller orifice (e. g. for
liquid gas: 0.23)
c
Small jet with larger orifice (e. g. for
liquid gas: 0.52)
Using a small screwdriver, unscrew
both small jets in the gas fitting.
Pull the jets out with a pair of pliers.
Select the jets as shown in the table
and fit, reversing the procedure, and
secure.