Electrical Connection - Miele GAS KM 81-2 Operating Instructions Manual

]ö
]ö
The automatic ignition requires connec-
tion to an a.c. single phase 120 V,
60 Hz power supply. Fuse rating is
15 A. Actual power consumption
(during ignition only) is 25 W.
These appliances are factory equipped
with a power supply cord ready for
connection to an electrically grounded
socket which complies with your local
electrical codes or with the:
National Electical Code ANSI/NFPA
No. 70-1481 for the USA
or
Canadian Electrical Code Part I for
Canada.
Ensure that the reeptacle is so posi-
tioned that it is easily accessible when
the appliance is built in.
Check that data given on the data plate
under the appliance complies with the
main voltage.
WARNING:
THIS APPLIANCE MUST BE
GROUNDED.
Do not cut or remove the grounding
prong from this plug.
18

Electrical connection

Electrical connection
Technical data CDN / USA
Total connected load . . . . . . . . . . . 25 W
Electrical connection to 3 prong wall
outlet:
. . . . . . . . . . . . . . . 120 V / 60 Hz / 15 A
Plug rating . . . . . . . . . . . . . . . . . . . 10 A
Power cord length . . . . . . . . 1.1 m (3 ft)