Malem MO4S Instruction Booklet page 6

8. Upon waking up to the alarm, try to stop any more urine from
being released from the bladder. Remove the Standard sensor
and wipe dry with a cloth. Remove the Easy-Clip sensor and
keep the lever open. Do NOT unplug the cable from the body of
the alarm. Stop the sound or vibration by pressing the
small reset button, use the lavatory to completely empty the
bladder, replace the sensor into a fresh pad or clip to a dry pair of
pants as before. Always test alarm by wetting sensor or
closing the Easy-Clip lever before use.
Parental help in waking up children when the alarm sounds
is reassuring and helpful especially during the first few
nights.
Vibrating ʻPCTʼ- Personal Continence Trainer
a. The vibration signals the start of urination - retrain the bladder by
tensioning the pelvic floor muscles. With practice, it is possible to
stop urination until the toilet is reached.
b. Note down the times of urination as they occur. Gradually, over a
period of time, a pattern will be apparent and the bladder can be
emptied before wetting.
Light Emitting ʻVCAʼ - Visual Continence Alarm
a. Can be used to give visual indication of urination so that the
client is changed to prevent prolonged exposure of skin to urine
with associated risk and complications.
b. Can be used to develop a toileting regime by tabulating
the clientʼs urination times. A pattern can be established and the
need for a bedpan or use of toilet anticipated.
This can result in a significant reduction in management
cost as well as an improvement in clientʼs moral.
MO4 & MO4S Ultimate 1 Alarm
The choice of Sound/s Only, Sound/s and Vibration or Vibration Only is
selectable by sliding the lever inside the battery compartment to setting
1, 2, or 3 accordingly. See diagram on page 13 and 14.
MO5 Ultimate 1 + Record Alarm
For choice selection of sound, vibration or recording see diagram on
page 15.
4