Frequently Asked Questions - Miele CVA 2650 CVA 2650 Operating Instructions Manual

Repairs to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.
Machine Problems
What if the light does not illuminate when turned on?
– Is the unit locked?
– Is the lighting set too low?
What if the display messages are difficult to read?
The contrast or brightness of the
displays are too low / high.
What if there is no prompt in the display?
The unit has no power.
What if the unit suddenly turns off?
– Is the machine plugged in?
– Is the machine programmed to
switch off after a programmed
time?
– The water temperature may be too
high.

Frequently asked questions

– If not, the light bulb has burnt out.
Contact the Miele Service Department.
– Adjust the lighting.
Adjust the display contrast / brightness.
– Is the main switch turned off?
– Is the machine plugged in?
– Check that the fuse is not defective.
If so contact the Miele Service
Department.
– Plug the machine in.
– The machine turns off into standby
mode when not used for the
programmed time.
– The unit is blocked until the water has
cooled.
47