Remote Control; Remote Control Features; Inserting Batteries Into The Remote Control - Wolf cinema SDC-12 User Manual

SDC-12/SDC-15

Remote Control

Remote Control
Your SDC-12 or SDC-15 projector remote controls have been modified to incorporate the following features:
Turns off the power
Switches the 3D format
Displays the 3D setting menu
For adjusting focus, zoom, and shift
Switches between saving, retrieving,
and editing of the lens memory
Hides the image temporarily
For selecting an item
Displays the menu,
or hides the menu if it is displayed
[SDC-12: Button positions]
For setting the gamma level
For setting the color temperature

Inserting Batteries into the Remote Control

• Slide open the rear cover, then insert the batteries according to the positive (+) and negative (-) indicator marks. Insert the
(-) end first.
• If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and
continue operating the remote control.
20
1080p D-IL A 3D Front Projector
STAND BY
INPUT
HDMI 1 HDMI 2
3D FORMAT 3D SETTING
LENS LENS
CONTROL MEMORY
HIDE
MENU
PICTURE MODE
FILM CINEMA
NATURAL STAGE
THX USER
COLOR
GAMMA
TEMP.
2013 User' s Manual
ON
Projector Power On
Select an input from [HDMI 1],
[HDMI 2], [COMP.], and [PC]
COMP.
[SDC-12: Switches the anamorphic mode]
PC
For setting frame interpolation
[SDC-12: For setting the lens aperture]
C.M.D
To Illuminate Remote Buttons for 7 seconds
LIGHT
To Select or Confirm
To Return to the Previous Menu
BACK
ANIME.
Switches the Picture mode to [FILM], [CINEMA],
[ANIME], [NATURAL], [STAGE], [3D], [THX], or [USER]
3D
For setting the MPC level
MPC
COLOR PIC.
Switches the items for adjusting the image quality,
P.FILE ADJ.
such as contrast, brightness, etc.
Color Space Button