Remote Control; Remote Control Features; Inserting Batteries Into The Remote Control - Wolf cinema SDC-10 User Manual

Remote Control Features

To Turn OFF the Projector
This button sequentially switches 3D formats
(*) This function cannot be used when inputing
2D and frame packing 3D singles
Display the 3D setting menu
Use this function to sequentially select focus,
zoom and shift adjustment lens controls
To hide the image temporarily
To display/close the menu
This sequentially switches between users 1-5
To adjust color temperature

Inserting Batteries into the Remote Control

• Slide open the rear cover, then insert the batteries according to the positive (+) and negative (-) indicator marks. Insert the
(-) end first.
• If an error occurs when using the remote control, remove the batteries and wait for 5 minutes. Load the batteries again and
continue operating the remote control.
STAND BY
HDMI 1
3D
FORMAT
LENS.
CONTROL
HIDE
MENU
PICTURE MODE
CINEMA
FILM
NATURAL
USER
COLOR
GAMMA
TEMP
To set gamma
ON
To Turn ON the Projector
INPUT
HDMI 2 COMP. To select input mode
3D
ANAMO.
This sequentially switches anamorphic modes
SETTING
This sequentially switches the call up/save/edit
modes of your lens memory
LENS
LENS AP.
MEMORY
To adjust Lens Aperture
LIGHT
To illustrate buttons on the remote control
for 7 seconds
To select confirm
BACK
To return to previous menu
ANIME
STAGE 3D To switch picture mode
Display the information menu
INFO C.M.D.
Color Space
COLOR PIC.
P.FILE ADJ.
Sequentially switched picture adjust items,
such as contrast and brightness. The switching
items are not the same for different models,
or different picture modes
SDC-10

Remote Control

19