Connecting Video Sources To The Projector - Wolf cinema SDC-12 User Manual

Connecting Video Sources to the Projector

• Do not turn on the AC power until all connections are completed.
• The connection procedures vary according to the device(s) used. For specific details, refer to the instruction manual of the
device(s) to be connected.
• This unit is used for image projection only. Connect video source gear to audio processing devices (such as AV receivers, used
with speakers) for proper sound output.
• The projector requires appropriate cabling from the video source components.
High quality cables make for improved video imaging. For HDMI cables (sold separately), only use those that are HDMI-approved.
HDMI Connectors (x2)
RS-232 Control Port
3D SYNCHRO Emitter Port
DB-15 PC Connector
BD/DVD Recorder
LAN Control Port
1 HDMI 2
RS-232-C C R/ P R C B/ P B Y
3D REMOTE
PC TRIGGER
SYNCHRO CONTROL
PC
BD/DVD Player
Component Video (RGB)
STANDBY/ON
INPUT
OK
MENU BACK
REMOTE IR Sensor
DC Trigger
VCR and Camcorder
SDC-12/SDC-15
27