Drying Sensor (Duct); Thermostats; Manual-Reset Thermostat; Automatic-Reset Thermostat - Electrolux HEC-RIM SEries Service Manual

6.4 Drying sensor (duct)

Detach the connectors.
Remove the two screws which secure the sensor to the duct
and remove the sensor.
When re-assembling, ensure that the gasket is correctly
positioned.

6.5 Thermostats

6.5.1

Manual-reset thermostat

Detach the connectors.
Remove the two screws which secure the thermostat to the
duct and remove the thermostat.
When re-assembling, ensure that the gasket is correctly
positioned.
6.5.2

Automatic-reset thermostat

Detach the connectors.
Remove the two screws which secure the thermostat to the
duct and remove the thermostat.
When re-assembling, ensure that the gasket is correctly
positioned.

6.6 Drying sensor (humidity)

Remove the sensor from the sleeve between the condenser
and the tub.
SOI/DT 2007-11 dmm
11/14
599 70 40-15