Table of Contents
Advertisement
4
About the Data Cartridge
This chapter explains the data cartridge used for this product.
4.1
Data Cartridges That can be Used
Use a data cartridge made for TANDBERG DATA's RDX QuikStor.
The data cartridge is a replaceable part. Replace 5 years after purchase to ensure
safety.
4.2
Handling the Data Cartridge
This section describes the points to note when handling the data cartridge used for this product.
Follow the notes below when handling the data cartridge.
• Do not drop or subject the cartridge to external shocks.
• Keep this cartridge away from exposure to strong magnetic field.
• Do not store the cartridge in a dusty place.
• Do not disassemble the whole cartridge.
• Do not demagnetize the cartridge.
• Do not forcibly insert the cartridge into the drive.
• To avoid occurrence of internal condensation, do not use this cartridge where extreme temperature
change occurs. (Temperature: <15°C/h, Humidity: <20%/h)
• If the environment has changed significantly, only use this cartridge after leave it in operation
environment at 24 hours.
• Do not apply labels anywhere but the label area (front of the data cartridge).
• Data cartridges are not designed to be stored for extended periods of time.
• When storing data in a data cartridge for a long time, store the data cartridge in its plastic case and
keep it under the following temperature and humidity conditions:
Item
Temperature
Humidity
Maximum wet-bulb
temperature
Storage Conditions
10 – 30 °C
20 – 60 % (No condensation)
24 °C or less
4 About the Data Cartridge
E
65
Advertisement
Table of Contents
