Table of Contents
Advertisement
2.3
Checking the BIOS and OS Settings of the
Server
2.3.1
Checking the BIOS Settings
The following shows how to check the BIOS settings.
Make sure to check and set the BIOS settings when using an FDD unit (USB) or
operating with a data cartridge inserted. If these settings are not performed, floppy
disk access will not be possible when booting from the FDD unit (USB), manually
installing Windows, or performing Windows Automatic System Recovery (ASR)
function.
1
Turn the server on.
2
During POST, press the [F2] key while the message "<F2> BIOS
Setup / <F12> BOOT Menu" is displayed on the screen.
3
The Main menu of BIOS Setup Utility is displayed when POST com-
pletes.
Check that "TANDBERGRDX-(TS)" is displayed in "Native IDE".
Main
System Time:
System Date:
Standard IDE:
Native IDE:
Boot Options
Base Memory:
Extended Memory:
F1
Help
Exit
Esc
Advanced
Security
[HH:MM:SS]
[MM:DD:YYYY]
[******]
[TANDBERGRDX-(TS)]
640KB
***M
-/+
Select Item
Select Menu
Enter
Server
Exit
Change Values
Select
Sub-Menu
2 How to Install and Introduce this Product to a Server
Item Specific Help
Setup Defaults
F9
Save and Exit
F10
E
53
Advertisement
Table of Contents
