Table of Contents
Advertisement
6
Check that booting from this product is disabled, and the FDD unit
(USB) is prioritized before this product (when an FDD unit (USB) is
connected).
1. Check if "!" is displayed in front of "TANDBERGRDX-(TS)".
If "!" is not displayed, perform the following operation to display it.
1. Select "TANDBERGRDX-(TS)".
2. Press the [Space] key.
"!" is displayed.
2. When an FDD unit (USB) is connected, check that "Y-E DATA USB-FDD-(USB
1.1)" is displayed above "TANDBERGRDX-(TS)".
If "Y-E DATA USB-FDD-(USB 1.1)" is displayed below "TANDBERDRDX-(TS)",
use the [+] and/or [-] key to move it above "TANDBERGRDX-(TS)".
3. Press the [F10] key to save the settings.
4. The BIOS Setup Utility will end.
• When an FDD unit (USB) is not connected:
Main
Advanced
Boot Sequence:
CD-ROM Drive:
+Diskette
!
TANDBERGRDX-(TS)
+Hard Drive
Legacy LAN card
Help
F1
Esc
Exit
Security
Server
Boot Sequence
-/+
Change Values
Select Item
Select Menu
Enter
Select
2 How to Install and Introduce this Product to a Server
Exit
Item Specific Help
Setup Defaults
F9
Save and Exit
Sub-Menu
F10
E
55
Advertisement
Table of Contents
