Asus Motherboard A8N-SLI Premium User Manual page 157

g. Use the up or down arrow keys to select desired copy method,
then press <Enter>.
h. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
i. Press <Y> to confirm or <N> to return to the Main Menu. A copy
progress appears if you previously selected offline copy.
• You can also create a RAID set using the SATARAID5 GUI utility
under a Windows
• For details on the Silicon Image SATARaid™ RAID 5 configuration,
refer to the "Sil3114 Userʼs Manual" found in your motherboard
support CD.
Creating a JBOD set (Spanning)
To create a JBOD set:
1. From the Silicon Image
configuration utility
main menu, select
Create RAID set then
press <Enter>.
2. From the sub-menu
Select JBOD then press
<Enter>.
3. The selection bar moves to the
Physical Drive menu. Using the
up or down arrow keys, select a
drive then press <Enter>
to set a drive for the RAID set.
4. The utility prompts a message
to input the RAID size, use the
up or down arrow keys to set
the RAID size then press <Enter>.
5. Press <Y> to confirm or <N> to return to the Main Menu.
• Configure a JBOD (Single) set when using a single Serial ATA drive;
otherwise, the system will not recognize the drive.
• You can also create a RAID set using the SATARAID5 GUI utility
under a Windows
ASUS A8N-SLI Premium
environment.
®
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
PHYSICAL DRIVE
0 XXXXXXXXXXX
1 XXXXXXXXXXX
2 XXXXXXXXXXX
3 XXXXXXXXXXX
environment.
®
RAID0 RAID0
RAID1 RAID1
RAID10 RAID5
SPARE DRIVE
RAID10
SPARE DRIVE
JBOD (Single)
XXXXXXMB
XXXXXXMB
XXXXXXMB
XXXXXXMB
5-39