Onboard Devices Configuration - Asus Motherboard A8N-SLI Premium User Manual

IRQ Resources
This sub-menu is activated only when the Resources Controlled By item is
set to Manual.
Advanced
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
F1:Help
ESC: Exit
IRQ-xx assigned to
When set to [PCI Device], the specific IRQ is free for use of PCI/PnP
devices. When set to [Reserved], the IRQ is reserved for legacy ISA
devices. Configuration options: [PCI Device] [Reserved]
PCI/VGA Palette Snoop [Disabled]
When set to [Enabled], the pallete snooping feature informs the PCI
devices that an ISA graphics device is installed in the system so that the
latter can function correctly. Configuration options: [Disabled] [Enabled]
4.4.3 Onboard Devices Configuration
Advanced
IDE Function Setup
NVRAID Configuration
USB Configuration
Onboard NV LAN
Onboard LAN Boot ROM
Onboard Marvell LAN
Onboard LAN2 Boot ROM
AC97 Audio
PCI IEEE 1394a
Silicon SATA Controller
Serial Port1 Address
Parallel Port Address
Parallel Port Mode
ECP MOde Use DMA
Game Port Address
Midi Port Address
x Midi Port IRQ
F1:Help
ESC: Exit
4-24
Phoenix-Award BIOS CMOS Setup Utility
IRQ Resources
↑↓ : Select Item
→←: Select Menu
Phoenix-Award BIOS CMOS Setup Utility
Onboard Device Configuration
↑↓ : Select Item
→←: Select Menu
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
[PCI Device]
-/+: Change Value
Enter: Select Sub-menu
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[3F8/IRQ4]
[378/IRQ7]
[ECP+EPP]
[3]
[201]
[Disabled]
10
-/+: Change Value
Enter: Select Sub-menu
Select Menu
Item Specific Help
Legacy ISA for devices
compliant with the
original PC AT bus
specification, PCI/ISA PnP
for devices compliant with
the Plug and Play standard
whether designed for PCI
or ISA bus architecture
F5: Setup Defaults
F10: Save and Exit
Select Menu
Item Specific Help
F5: Setup Defaults
F10: Save and Exit
Chapter 4: BIOS setup