Panorama Mode - Kodak PixPro AZ421 User Manual

Panorama Mode

With Panorama Mode, you can take a series
of pictures which will be stitched
automatically into a ultra-wide panoramic
picture by the camera.
Follow the steps below:
1. Turn the Mode Dial to Panorama Mode
( ) .
2. Press the arrow buttons to select a
shooting direction. (The right direction is
used as default if you do not make any
choice) 2 seconds later, the camera is
ready to take pictures. You can also press
the button or half press the shutter
button to be ready to take pictures.
3. Compose the first view of the panoramic
picture on the LCD screen and press the
Shutter button to capture the image.
32 32
Cancel
Save
4. When you finish shooting the first photo,
two target icons will display on the LCD
screen at left and right sides. Move the
camera to the right until the round target
icon is directly positioned over the square
box. The box will turn green when they
overlap and the camera will automatically
take the next picture. Repeat the same
steps for additional shots. Up to 4 frames
can be stitched together.
5. If continuous pictures are less than 4
shots, press the
will stitch the pictures automatically. Press
the playback button to enter playback
mode to see the effect.
6. If you take 4 pictures, the camera will
automatically stitch the pictures. Press the
playback button to enter playback mode to
see the effect.
button and the camera