Panorama Mode - Kodak PIXPRO FZ45-WH User Manual

Panorama Mode

With Panorama Mode, you can take a series of
pictures which will be automatically stitched into
an ultra-wide panoramic (up to 180°) picture by the
camera.
1. Press the arrow buttons to select a desired
shooting direction. Should you not select a
direction, the default shooting direction is "left
to right". 2 seconds later, the camera will be
ready to take pictures. You can also press the
button or press the shutter button halfway
down to get ready to take panoramic pictures.
2. Compose the first view of the panoramic picture
on the LCD and press the Shutter button to
capture the image.
3. When you finish shooting the first photo, two
target icons will display on the LCD at left and
right sides. Move the camera to the right until
the round target icon is directly positioned over
the square box. The box will turn green when
they overlap and the camera will automatically
take the next picture. Repeat the same steps for
additional shots. Up to 4 frames can be stitched
together.
Cancel
4. If continuous pictures are less than 4
shots, press the button, the camera will
automatically stitch the pictures together. Press
the Playback button to enter Playback Mode to
see the finished effect.
5. If you take 4 pictures, the camera will stitch
the pictures together automatically. Press the
Playback button to enter Playback Mode to see
the finished effect.
In Panorama Mode, the Flash, Self-timer,
Macro Modes and Exposure Compensation
are not available. Focus Adjustment is also not
available at this time.
In Panorama Mode, up to 4 photos can be
captured when the image size is set at 2M.
Save
27