Table of Contents
Advertisement
Panorama Mode
With panorama mode, you can take a series of pictures
which will be stitched automatically into an ultra-wide
panoramic picture by the camera.
Follow the steps below:
1. Turn the mode dial to panorama mode (
2. Press the arrow buttons to select a shooting direction.
(The right direction is used as default if you do not
make any choice) 2 seconds later, the camera is ready
to take pictures. You can also press the
or half press the shutter button to be ready to take
pictures.
3. Compose the first view of the panoramic picture on
the LCD and press the Shutter button to capture the
image.
4. When you finish shooting the first photo, two target
icons will display on the LCD at left and right sides.
Move the camera to the right until the round target
icon is directly positioned over the square box. The
box will turn green when they overlap and the camera
) .
will automatically take the next picture. Repeat the
same steps for additional shots. Up to 4 frames can
be stitched together.
5. If continuous pictures are less than 4 shots, press
button
the
button and the camera will stitch the pictures
automatically. Press the playback button to enter
playback mode to see the effect.
6. If you take 4 pictures, the camera will automatically
stitch the pictures. Press the playback button to enter
playback mode to see the effect.
During shooting, the flash, self-timer, macro modes
and exposure compensation are not available.
Focus adjustment is also not available at this time.
In the process of automatic panoramic shooting,
"Improper alignment. Please try again." shown on
the LCD means that the moving angle deviates
from the green baseline during camera moving
which leads to shooting failure, and you need to
shoot again.
29
Advertisement
Table of Contents
