Page 1
DS12F DS15F DS28F DS36F ED50F ED50Feco Quick guide Put your new Wood’s dehumidifier to work in just a few minutes!
Page 2
A. Unwrapping and installing the SMF-filter. Gently remove the dehumidifer from If there is already a filter attached to your dehumidifier, the box. Make sure to that you don’t please remove it before installing the SMF-filter. thow away any important objects that are included in the box.
Page 3
Take out the filter and the Attach the frame to the dehumidifer. Use the foam tape to frame from the bag. make the connection tight and the plastic plugs to attach the frame.
Page 4
Insert the filter in the frame. Put the lid on. If you need to replace an existing filter, lift up the lid and remove the old filter. Insert a new filter and put the lid back.
Page 5
B. Starting your dehumidifier Connect the dehumidifier to a power source. The unit has two controls, the hygrostat (top) and the fan NOTE! Always use a grounded power source. speed selector (bottom). To switch the unit on, turn the hy- grostat clock wise until you hear a ‘click’, the unit starts.
Page 6
The condensated water is collected in the To empty the water bucket, gently pull it out and pour water tank on the back of the unit. When the out the water. Reinsert the water bucket and make bucket is full, the unit automatically shuts off sure that the float is allowed to hang freely inside.
Page 7
You can also attach a water hose to the machine. This way you don’t have to empty the water bucket, the water will be continuously drained. Attach the hose fitting connection to the machine. Fasten a water hose to the connec- tion.
Page 8
Wood’s dehumidifers are distributed by TES Scandinavia. If you have any questions, don’t hestitate to contact us. info@tesscandinavia.se For your closest reseller in your specific country, please visit www.woodseurope.com...
Need help?
Do you have a question about the DS12F and is the answer not in the manual?
Questions and answers