Copter
Propellers
GHOSTDRONE 2.0 uses 2-bladed 8.5-inch self-tightening propellers. Propeller nuts have two
colors, silver and black. Each indicates different rotating directions.
Legends
LOCK: Tighten the propeller in this direction.
UNLOCK: Remove the propeller in this direction.
Installation
1. Put the copter upside down on soft surface to avoid scratches.
2. Match the silver nut propellers with the L motors (with silver motor shaft), and tighten the propellers
according to the LOCK instructions.
ASSEMBLY
Install the
propellers
propeller guards
06
Install the
Completed
Assembly