G-Box - ehang GHOSTDRONE 2.0 Operating Manual

G-BOX

G-BOX is a wireless interface unit designed specifically for controlling and interfacing with the
GHOSTDRONE. GHOSTDRONE 2.0 G-BOX is compatible with both Android and iOS system.
Each GHOSTDRONE is paired with one G-BOX. The App cannot operate the GHOSTDRONE
without a G-BOX. Please store the G-BOX appropriately. If G-BOX is missing, it will be neces-
sary to replace a new G-BOX unit.
Structural Diagram
Charging Port
Switch
Charge/Battery Life
Indicator
Using the G-BOX
Power On
Power Off
While Charging
Fully Charged
Electric current
Switch/Battery Life Indicator
Note: You can charge the G-BOX by connecting it to a PC with a USB cable. When charging through a USB adapter,
the required input current is 500 mA or higher.
G-BOX
Power Indicator
USB
PWR DATA
iOS Android
Communication Indicators
Press the power button once.
After the G-BOX turns on, the battery indicator, PWR and DATA indicators will turn on.
After several seconds the battery indicators turns off to save battery.
Hold the power button until the PWR indicator turns off.
The four LEDs next to the power button flash in sequence.
The left side LED flashes while the right three LEDs on the right are solid.
The number of flashing LEDs indicates G-BOX's power levels.
USB Power Cable
Charging G-BOX (with power adapter)
14
Main Antenna Direction
Andriod
iOS