Led Indicator Light Instructions - ehang GHOSTDRONE 2.0 Operating Manual

Hide thumbs Also See for GHOSTDRONE 2.0:
Table of Contents

Advertisement

Copter Indicator Lights Instructions
On GHOSTDRONE 2.0, there are four arm indicator lights and one front indicator light. The front
indicator light displays multiple colors; the two front arm indicator lights display red; and the rear
two lights display blue.
The following chart describes the display status of the lights and their corresponding explanation.
Legend
High Frequency
Front Indicator Light
After powering on, front indicator
light shows in white solid color
then flashes in blue and green at
high frequency until stop
Flashes in yellow and blue at
low frequency alternately
High frequency flash (red)
Low frequency flash (yellow)
Low frequency flash (blue)
Solid yellow
Solid green
Low frequency flash (yellow)
Terminologies
3D Lock: Lock copter's current three-dimension location using GPS.
High Frequency Flash: Flash rapidly.
Low Frequency Flash: Flash slowly.
Front Indicator Light:
Front Arm Indicator Light:
Rear Arm Indicator Light:
Low Frequency Flash
Arm Indicator Light
Aircraft Indicator Light Status Information Chart
16
Descriptions
Initializing
When transmitter "Unlock" or "Throttle"
Joystick position is incorrect, do not unlock.
(Skip this status when not using transmitter.)
Unlock check failed, do not unlock.
GPS is not 3D locked. Unlock is only accessible
in manual mode.
GPS is 3D locked. Ready to unlock.
GPS is not 3D locked. Unlock successful.
GPS is 3D locked. Unlock successful.
Low battery. (Not related to unlock or not.)
Solid

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Related Products for ehang GHOSTDRONE 2.0

Table of Contents