Apm Configuration - Asus Desktop PC T2-AE1 User Manual

5.5.5 5.5.5 5.5.5

APM Configuration

APM Configuration APM Configuration
5.5.5 5.5.5 APM Configuration APM Configuration
APM Configuration
Power Button Mode
Restore on AC Power Loss
Resume on Ring
Resume on LAN
Resume on PME#
Resume On Keyboard
Resume PS/2 Mouse
Resume On RTC
Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off] Power Button Mode [On/Off]
Allows the system to go into On/Off mode or suspend mode when the
power button is pressed. Configuration options: [On/Off] [Suspend]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
Restore on AC Power Loss [Power Off] Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power
loss. When set to Power On, the system goes on after an AC power loss.
When set to Last State, the system goes into either off or on state,
whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Resume on Ring [Disabled] Resume on Ring [Disabled]
Resume on Ring [Disabled] Resume on Ring [Disabled] Resume on Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume on LAN [Disabled] Resume on LAN [Disabled] Resume on LAN [Disabled]
Resume on LAN [Disabled] Resume on LAN [Disabled]
Allows you to enable or disable the LAN GPI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume on PME#[Disabled] Resume on PME#[Disabled]
Resume on PME#[Disabled] Resume on PME#[Disabled] Resume on PME#[Disabled]
Allows you to enable or disable the PME to generate a wake event.
Configuration options: [Disabled] [Enabled]
Resume on Keyboard [Disabled] Resume on Keyboard [Disabled]
Resume on Keyboard [Disabled] Resume on Keyboard [Disabled] Resume on Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1 A S U S T 2 - A E 1
[On/Off]
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Go into On/Off or
Suspend when Power
button is pressed.
5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9 5 - 2 9