Hardware Health Event Monitoring Screen - ASROCK gaia 404 Quick Manual

Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [BIOS Setup
Only]. The default value is [Enabled]. Please refer to below descriptions
for the details of these four options:
[Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected.
[Disabled] - USB devices are not allowed to use under legacy OS and
BIOS setup when [Disabled] is selected. If you have USB compatibility
issue, it is recommended to select [Disabled] to enter OS.
[BIOS Setup Only] - USB devices are allowed to use only under BIOS
setup and Windows / Linux OS.

3.5 Hardware Health Event Monitoring Screen

3.5 3.5 3.5 3.5 Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen Hardware Health Event Monitoring Screen
In this section, it allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, CPU
fan speed, chassis fan speed, and the critical voltage.
Main Smart Advanced
Hardware Health Event Monitoring
CPU Temperature
M / B Temperature
NB Fan Speed
System Fan Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
System Fan Setting
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
System Fan Setting
The system fan improves the air circulation of the computer's enclosure.
Use this option to adjust the fan speed. The default value is [Full On].
Configuration options: [Full On], [Manual]. Manual allow user to set Target
Fan Speed from level 1-9
BIOS SETUP UTILITY
H/W Monitor Boot Security
Fan configuration
mode setting
: 34 C / 93 F
: 31 C / 87 F
: 4218 RPM
: 2721 RPM
: 1.208V
: 3.328V
: 4.848V
Select Screen
: 12.460V
Select Item
F1 General Help
[Full on]
F9 Load Defaults
F10 Save and Exit
ESC Exit
Exit
29 29 29
29 29