Table of Contents
Advertisement
3.
Panel connector (8-1 pin PANEL)
This connector supports several chassis-mounted functions through
connection with the motherboard panel connector (36-1 pin). Refer to
the section "10. System Panel Connector (36-1 pin PANEL)" on page
4-11 for details.
•
System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. The system power
LED lights up when you turn on the system power, and blinks when
the system is in sleep mode.
•
Hard disk drive activity (2-pin HDLED)
This 2-pin connector is for the HDD Activity LED. The IDE LED lights
up or flashes when data is read from or written to the HDD.
•
Power/Soft-off button (1-pin PWR)
This connector is for the system power button. Pressing the power
button turns the system ON or puts the system in SLEEP or SOFT-OFF
mode depending on the BIOS settings. Pressing the power switch for
more than four seconds while the system is ON turns the system OFF.
Front panel daughterboard
ASUS T2-PH2
PWR
PANEL
PLED HDLED
Requires an ATX power supply.
*
4-13
Advertisement
Table of Contents
