Add Media - D-Link DCS-1201 User Manual

Section 3: Configuration
There are three types of media: Snapshot, Video Clip, and System Log. After making any
changes, click the Save Settings button to save your changes.
Media Name:
Snapshot:
Source:
Send pre-event image(s) [0~3]:
Send post-event image(s) [0~7]:
D-Link DCS-1201 User Manual

Add Media

Enter a unique name for the media you want to create.
Select this option to set the media type to snapshots.
Set the video profile to use as the media source. Refer
to "Audio and Video" on page 33 for more information on
video profiles.
Set the number of pre-event images to take. Pre-event
images are images taken before the main event snapshot
is taken.
Set the number of post-event images to take. Post-event
images are images taken after the main event snapshot
is taken. You can set up to 7 post-event images to be
taken.
For example:
If both Send pre-event images and Send post-
event images are set to four, a total of 9 images
will be saved after a trigger is activated.
1 pic. 2 pic. 3 pic. 4 pic. 5 pic.
The moment the
trigger is activated.
6 pic. 7 pic. 8 pic. 9 pic.
42