D-Link DCS-1201 User Manual page 13

Hd covert network camera

Hide thumbs Also See for DCS-1201:

Table of Contents

Section 2: Installation

Step 3

The Setup Wizard will appear and display the MAC address and IP address of your

camera(s). If you have a DHCP server on your network, a valid IP Address will be

displayed. If your network does not use a DHCP server, the network camera's

default static IP 192.168.0.20 will be displayed.

Select your camera, then click the Wizard button to continue.

Step 4

Enter the Admin ID and password. When logging in for the first time, the default

Admin ID is admin with the password left blank.

Click the checkboxes if you wish to change the admin ID and password for the

camera, and enter the new ID and password you wish to use.

Click Next to continue.

D-Link DCS-1201 User Manual

Table of Contents