Instrument And Control Functions - Yamaha Cygnus-X XC125 Owner's Manual

Hide thumbs Also See for Cygnus-X XC125:
Table of Contents

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS

a tripmeter (which shows the dis-
tance traveled since it was last
set to zero)
an oil change tripmeter (which
1
shows the distance traveled since
the last engine oil change)
an oil change indicator (which
2
flashes when the engine oil
should be changed)
3
a clock
a fuel meter
4
TIP
5
When the key is turned to "ON",
all segments of the display come
on for a few seconds. During this
6
time, the multi-function display is
performing a self-test.
7
Be sure to turn the key to "ON"
before using the "SELECT" and
8
"RESET" buttons.
Odometer, tripmeter and oil change
9
tripmeter modes
Pushing the "SELECT" button switch-
es the display among the odom-
eter mode "ODO", the tripmeter mode
"TRIP" and the oil change tripmeter
"OIL CHANGE TRIP" in the following
order:
ODO → TRIP → OIL CHANGE TRIP
→ ODO
Odometer
TIP
If the odometer indicates "-----", have
a Yamaha dealer check the multi-
function display, as it may be faulty.
Tripmeter
To reset the tripmeter, select it by
pushing the "SELECT" button until
"TRIP" is displayed, and then push the
"RESET" button at least 1 second.
TIP
If the tripmeter indicates "-----", have
a Yamaha dealer check the multi-
function display, as it may be faulty.
Oil change tripmeter
To reset the oil change tripmeter, se-
lect it by pushing the "SELECT" but-
3-4
ton until "OIL CHANGE TRIP" is dis-
played, and then push the "RESET"
button at least 3 seconds.
Push the "SELECT" button again to
start the oil change tripmeter; the dis-
play changes to the ODO mode.
Oil change indicator "7"
This indicator flashes at the initial
1000 km (600 mi), then at every 3000
km (1800 mi) thereafter to indicate
that the engine oil should be changed.
After changing the engine oil, reset
the oil change tripmeter.
If the engine oil is changed before
the oil change indicator flashes (i.e.
before the periodic oil change interval
has been reached), the oil change
tripmeter must be reset after the
oil change for the next periodic oil
change to be indicated at the correct
time.
TIP
If the oil change tripmeter is reset
before the initial 1000 km (600
mi), the next periodic oil change
EAU1044E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents