F6 Floppy Configuration Utility - DFI NP100-N16C User Manual

F6 Floppy Configuration Utility

You need to prepare an AHCI driver floppy diskette that you will need when you
install the AHCI driver during Windows XP installation.
1. Click "F6 Floppy Configura-
tion Utility" on the main
menu.
Windows Explorer will ap-
pear showing the locations
of the installation files.
2. Click the Edit menu then
click "Select All".
3. Insert a blank formatted
floppy diskette into a floppy
disk drive.
4. Right click on the files,
select "Send To" and then
select "3½ Floppy (A:)".
The system will copy the
selected files into the dis-
kette.
Supported Software
4
125