Programmer - Potterton promax store 24 User Manual

Fig. 7
1 Set Indicator
2 Set Positions
3 Time of Day
4 Day of Week Indicator
5 ON/OFF Switch Period Symbol
6 SET Button
7 Minus (-) Adjust Button
8 Plus (+) Adjust Button
9 ENTER Button
10 COPY Button
THE RECOMMENDED COMBINATION IS :
Hot Water Programme
ALL DAY
The display should then look like this :
Fig. 8
RUN
CLOCK
HW PROG
CH PROG
Fig. 9
RUN
CLOCK
HW PROG
CH PROG
10
1
3 4
M T W T F S
RUN
AM
CLOCK
2
HW PROG
CH PROG
ON
ADVANCE
5
HW
BOOST ADVANCE
_
SET + ENTER
6 7 8
C/Heating Programme
AUTO
M T W T F S S HW CH
AUTO
AM
ALL DAY
24 HR
OFF
M T W T F S S HW CH
AM
7.1
S HW CH
AUTO
ALL DAY
1. The built-in programmer is an electronic 7-day
24 HR
central heating and hot water control, designed to be
OFF
easy to use and understand. Properly programmed it
will help you save energy and create a comfortable
environment in your home.
CH
2. For convenience, morning and evening ON/OFF
HW CH
periods have been pre-set in the programmer 'memory'
and will be retained, even if the mains power supply is
COPY
interrupted. Details of these ON/OFF periods are given
in the next section, together with step-by-step setting
instructions.
9 10
3. In run mode, any combination can be set (using the
ENTER and COPY buttons) e.g.
Hot Water Programme
AUTO
4. The Promax programmer also offers the following
features :
*
*
*
7.2
Most of the control buttons on the programmer are dual
purpose. They can be used as SET buttons for inputting
time of day. ON/OFF times, etc, or as SELECT buttons
for using the advance facility and choosing override
programme options.
Figure 7 can be used to identify the SET buttons,
indicators and symbols.
7.3
1. Turn the appliance selector switch to central heating
and hot water position.
2. Setting Day and Time
i) Press the SET button so that the SET INDICATOR is
AUTO
pointing to the CLOCK position on the front of the
ALL DAY
programmer. the DAY OF THE WEEK INDICATOR will
24 HR
now flash (see Fig. 9).
OFF

7.0 Programmer

Introduction
C/Heating Programme
AUTO
or ALL DAY
or 24 HOUR (Continuous)
or OFF
Up to 3 On-Off time periods every 24 hours plus
the option of programming different times for each
day of the week.
A central heating ADVANCE button allowing an
instant switch from OFF to ON or ON to OFF
without affecting normal settings.
A hot water BOOST button giving an extra one hour
period.
Buttons, Indicators & Symbols
Setting the Programmer
NOTE: When setting the day, time of day or switch
times, if a period exceeding 60 seconds is allowed
to elapse between button presses, the programmer
will automatically return to normal RUN mode and
any changes made since the last press of the
ENTER button will not be saved.
© Baxi Heating UK Ltd 2015