Disconnecting The Mobile Mic Gateway From Mobile Radio; Coiled Cord Replacement; Anatel Label - Motorola PMMN4095 series User Manual

Disconnecting the Mobile Mic Gateway from
Mobile Radio
To disconnect the Mobile Mic Gateway from your mobile radio, follow
the steps below:
Procedure:
1
Turn the locking collar of the Mobile Mic Gateway in a quarter turn
counterclockwise.
2
Pull the cable from the accessory interface connector to release.

Coiled Cord Replacement

To remove the PMMN4097 coiled cord, follow the steps below:
Procedure:
1
Rotate the locking collar at the base of the Mobile Mic Gateway in a
counterclockwise direction until it stops.
2
Pull the cord out and away from the base of the Mobile Mic
Gateway.
3
Install a coiled cord in the reverse order of removal.
22
English

Anatel Label

This equipment operates as a secondary user, so it is not entitled to
protection from harmful interferences, even if generated by similar
equipment, and it may not cause harmful interference on systems
operating as primary users.