Freeform F2000 Operating Instructions Manual page 6

Step 4:
Step 5:
Step 6：
1. Disassemble bolt M6*12 (113) by
using 5#Allen wrench (80), remove
the motor top cover (11).
1.Fix the left and right upright tubes
(C, D) to the main frame (1) with bolt
M10*20 (106),spring washer (126)
and flat washer (120) by using
8#Allen wrench (79).
Notice: Make sure the middle signal
wire (47) and lower signal wire (48)
are well connected before assemble.
1. Fix the console panel (B) to the
console top cover (A) with screw
ST4.2*12
Phillips screwdriver (81).
Notice: Make sure the wire of
console panel (B) and the wire of
console top cover (A) are well
connected as per the color
before assemble.
6
(96) by using the