6.3. Alignment Process Flow Diagram.
Return To Prism
Targeting Mode
Repeat the
process for the
thumbwheel
22318.10.03 15.09.05
Select alignment mode AMBER
LED will illuminate for
5 seconds
Constant
AMBER
Wait until both LED's stop
flashing (up to 30 seconds)
Slowly adjust a thumbwheel in
one direction and observe the
Amber
flashing?
Reverse the
direction of the
thumbwheel
No
thumbwheels
adjusted?
other
For optimum alignment,
deflection of the beam in all
four planes should cause
the Amber LED to flash first
Exit Alignment
Mode and enter
Operating Mode
LEDs
Red
Stop turning the
LED
thumbwheel and wait
for the Red LED to
Slowly turn the
thumbwheel in the
same direction
Amber
Both
Stop turning the
Yes
6
stop flashing
Red
LED
flashing?
Neither
thumbwheel