9. Typical single zone wiring diagram.
10.2 to 30 Volts DC (RED)
FIRERAY
Fire Relay
Trouble Relay
This diagram is an example for a single Fireray being the only device on a zone. The correct operation
for Fire and Trouble should always be checked connected to a typical panel. Relays are shown in normal
powered no fault condition. Contact fire panel manufacturer for values of 'Alarm Resistor' and 'End of
Line Component'.
22318.10.03 15.09.05
PSU
0V (BLACK)
NO (YELLOW)
COM (BLUE)
COM (WHITE)
NC (GREEN)
ZONE WIRING
Alarm Resistor
End of Line Component
9