Selecting A Single Picture And Printing It - Panasonic DMC-FS33 Operating Instructions Manual

Note
• This unit cannot stand upright when the AC adaptor is connected. When operating it on
a flat surface, we recommend placing it on a soft cloth.
• Do not use any other USB connection cables except the supplied one.
Use of cables other than the supplied USB connection cable may cause malfunction.
• Turn the camera off before connecting or disconnecting the AC adaptor (optional).
• Before inserting or removing a card, turn the camera off, and disconnect the USB
connection cable.
• You cannot switch between the built-in memory and the card while the camera is
connected to the printer. Disconnect the USB connection cable, insert (or remove) the
card and then connect the USB connection cable to the printer again.
1
Touch [w]/[q] to select the picture, and touch
[PRINT].
2
Touch [PRINT START].
• Refer to "Print Settings"
set before starting to print the pictures.
• Press shutter button halfway to cancel printing halfway.
• Disconnect the USB connection cable after printing.
Downloaded from ManualsCamera.com Manuals
Connecting to other equipment

Selecting a single picture and printing it

(P120) for the items which can be
- 118 -
PictBridge 14
M
100-0001
1/19
MULTI PRINT PRINT
SINGLE SELECT
PRINT START
1/2
PRINT WITH DATE
OFF
NUM.OF PRINTS
1
CANCEL