@ [VERSION DISP.]
v [FORMAT]
• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional) when formatting. Do not turn the camera off during formatting.
• If a card has been inserted, only the card is formatted. To format the built-in memory,
remove the card.
• If the card has been formatted on a PC or other equipment, format it on the camera
again.
• It may take longer to format the built-in memory than the card.
• If the built-in memory or the card cannot be formatted, consult your nearest Service
Centre.
Downloaded from ManualsCamera.com Manuals
Preparation
It is possible to check which version of firmware is on
the camera.
The built-in memory or card is formatted. Formatting
irretrievably deletes all the data so check the data
carefully before formatting.
- 31 -