Audio Page - JVC XV-521BK Instructions Manual

SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
Each time you press
CURSOR 3, the language
setting changes in the
following order:
ENGLISH = SPANISH = FRENCH = CHINESE =
GERMAN = ITALIAN = JAPANESE = language code
from AA to ZU
(See "Table of languages and their abbreviations" at
the end of this manual.)
Pressing CURSOR 2 changes the language setting in
the reverse order of the above.
* If the selected language is not recorded, the disc's
default subtitle language will be displayed.
ON SCREEN LANGUAGE
You can select the on-screen display language to be
displayed.
Each time you press
CURSOR 3, the language
setting changes as
follows:
English ON SCREEN LANGUAGE
German
BILDSCHIRMMENUE-SPRACHE
French
LANGUE D'ECRAN
Pressing CURSOR 2 changes the language setting in
the reverse order of the above.
Downloaded From Disc-Player.com JVC Manuals
LANGUAGE AUDIO DISPLAY
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
AUDIO DISPLAY
LANGUAGE
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
ENGLISH
DEUTSCH (German)
FRANCAIS (French)
ENGLISH
DEUTSCH
FRANCAIS

AUDIO page

DIGITAL AUDIO OUTPUT
To connect the unit's
SYSTEM
digital output to an
ENGLISH
ENGLISH
external device equipped
ENGLISH
ENGLISH
with a digital input, this
EXIT
item must be set
correctly.
• PCM ONLY:
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
• STREAM/PCM:
When you connect to the digital input of an amplifier
to a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
• DOLBY DIGITAL/PCM:
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
The following chart shows the relationship between
SYSTEM
types of playback discs and output signals.
ENGLISH
ENGLISH
ENGLISH Playback discs
ENGLISH
EXIT
DVD with 48-kHz,
16-bit linear PCM
DVD with 48-kHz,
20/24-bit linear
PCM
DVD with 96-kHz,
linear PCM
DVD with DTS
DVD with Dolby
Digital
DVD with MPEG
multichannel
Video CD
Audio CD
Audio CD with
DTS
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your
speakers. Never use the unit's analog output jacks, which
output incorrect signals that may damage your speakers.
If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the amplifier
connected to the analog outputs to minimum.
Initial settings
LANGUAGE AUDIO DISPLAY
DOLBY
DIGITAL AUDIO OUTPUT
DIGITAL
Lo / Ro
DOWN MIX
COMPRESSION
PRESS KEY
Output
STREAM/PCM DOLBY DIGITAL/PCM PCM ONLY
←
48-kHz,
16-bit linear
PCM
←
48-kHz,
20-bit linear
PCM
←
No output
No output
DTS
bitstream
←
48-kHz, 16-bit
Dolby Digital
linear PCM
bitstream
48-kHz, 16-bit
MPEG
linear PCM
bitstream
←
44.1-kHz,
16-bit linear
PCM
←
44.1-kHz,
16-bit linear
PCM
←
DTS
bitstream
English
Français
SYSTEM
/PCM
ON
EXIT
←
←
←
←
←
←
←
←
36