GE ZDIC150 Owner's Manual page 11

Caring
The clean light signal will illuminate yellow when
for your
the electronic control senses that the need for
cleaning is approaching. At this time you need
icemaker
to purchase Nickel Safe Ice Machine Cleaner by
Nu Calgon, available at most appliance repair
shops or through GE Parts and Accessories.
Order part number WX08X42870. In the U.S.A.,
call 1-800-626-2002 or visit Monogram.com. In
Canada call 1-800-561-3344. The clean light will
eventually turn red which means the icemaker
must be cleaned, otherwise ice production will
decrease significantly or stop altogether.
IMPORTANT: For best results, use the entire
contents of the bottle to clean the unit.
See Care and Cleaning—Icemaker system section.
Exterior
Door handles and trim—Clean with a cloth
surfaces dampened with soapy water. Dry with a soft
cloth.
Keep the outside clean. Wipe with a clean cloth
lightly dampened with mild liquid dish
detergent. Dry with a clean, soft cloth. Do not
wipe the icemaker with a soiled dish cloth or wet
towel. These may leave a residue that can
damage the finish. Do not use scouring pads,
powdered cleaners, bleach or cleaners
containing bleach because these products can
scratch and damage the finish.
Care and Cleaning
Icemaker
The air cooled condenser (see page 9
for location) needs to be cleaned regularly
for efficient ice production and energy
conservation.
See Care and Cleaning - Condenser section.
Stainless steel—Regularly clean and polish the
stainless steel door panels and handles (on
some models) with a commercially available
stainless steel cleaner such as Stainless Steel
Magic to preserve and protect the fine finish.
™
Stainless Steel Magic is available through
GE Parts and Accessories, 800.626.2002,
or monogram.com. Order part number
WX10X15.
Do not use appliance wax or polish on the
stainless steel.
11