Connecting The Power Cable; Other Connections; About The Standby State - Yamaha MCR-B043D Owner's Manual

Connecting the power cable

When you've completed all connections, connect this unit's power cable to an AC outlet.

Other connections

USB device
Connect your USB device to the USB port on the front panel. For details on playable files, refer to "NOTES ON DISCS AND
USB DEVICES" (☞ P. 25).
External devices
Using a commercially available 3.5 mm mini-plug cable, connect your external device to the AUX jack on the rear panel of
this unit.
Rear panel
AUX IN

About the standby state

This unit has the following two types of standby state. Select the mode in POWER SAVING settings menu (☞ P. 18).
Mode
ECO standby *
(power saving mode)
Standby
* Default setting
Rear panel
The USB device is automatically charged when this unit is connected to the AC outlet.
• Stop playback before disconnecting the USB device.
• Charging may not be possible depending on the USB device.
Setting menu
(POWER Clock display
SAVING)
ECO No clock display
NORMAL Show
Bluetooth Charging of USB
connection devices
Disable Enable
Enable Enable
CONNECTIONS
Alarm setting
Disable
Enable
5
En